dmesg - 1024 MB DDR
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000edfcddc0 (usable)
BIOS-e820: 00000000edfcddc0 - 00000000edfd0000 (ACPI data)
BIOS-e820: 00000000edfd0000 - 00000000ee000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000112000000 (usable)
DMI 2.3 present.
last_pfn = 0x112000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF write-back
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF00000000 write-back
1 base 0100000000 mask FFF0000000 write-back
2 base 0110000000 mask FFFE000000 write-back
3 base 00EE000000 mask FFFE000000 uncachable
4 base 00F0000000 mask FFF0000000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000ee000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xedfcd max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000edfcd000
0000000000 - 00ede00000 page 2M
00ede00000 - 00edfcd000 page 4k
kernel direct mapping tables up to edfcd000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000112000000
0100000000 - 0112000000 page 2M
kernel direct mapping tables up to 112000000 @ c000-12000
RAMDISK: 3770f000 - 37fef0df
ACPI: RSDP 00000000000fdfc0 00014 (v00 IBM )
ACPI: RSDT 00000000edfcff80 00030 (v01 IBM SERBLADE 00001000 IBM 45444F43)
ACPI: FACP 00000000edfcfec0 00084 (v02 IBM SERBLADE 00001000 IBM 45444F43)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI: DSDT 00000000edfcddc0 01EA6 (v01 IBM SERBLADE 00001000 INTL 02002025)
ACPI: FACS 00000000edfcfcc0 00040
ACPI: APIC 00000000edfcfe00 0009C (v01 IBM SERBLADE 00001000 IBM 45444F43)
ACPI: SRAT 00000000edfcfd00 000E8 (v01 IBM SERBLADE 00001000 IBM 45444F43)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 1 PXM 1 80000000-ee000000
SRAT: Node 1 PXM 1 100000000-112000000
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000080000000
NODE_DATA [000000000000d000 - 0000000000014fff]
bootmap [0000000000015000 - 0000000000024fff] pages 10
(8 early reservations) ==> bootmem [0000000000 - 0080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016d9584] TEXT DATA BSS ==> [0001000000 - 00016d9584]
#3 [003770f000 - 0037fef0df] RAMDISK ==> [003770f000 - 0037fef0df]
#4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#5 [00016da000 - 00016da2a4] BRK ==> [00016da000 - 00016da2a4]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
Bootmem setup node 1 0000000080000000-0000000112000000
NODE_DATA [0000000080000000 - 0000000080007fff]
bootmap [0000000080008000 - 000000008001a3ff] pages 13
(8 early reservations) ==> bootmem [0080000000 - 0112000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 00016d9584] TEXT DATA BSS
#3 [003770f000 - 0037fef0df] RAMDISK
#4 [000009d400 - 0000100000] BIOS reserved
#5 [00016da000 - 00016da2a4] BRK
#6 [0000008000 - 000000c000] PGTABLE
#7 [000000c000 - 000000d000] PGTABLE
found SMP MP-table at [ffff88000009d540] 9d540
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001800000-ffff8800033fffff] on node 0
[ffffea0001c00000-ffffea0003dfffff] PMD -> [ffff880080200000-ffff8800821fffff] on node 1
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00112000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x00080000
1: 0x00080000 -> 0x000edfcd
1: 0x00100000 -> 0x00112000
On node 0 totalpages: 524189
DMA zone: 56 pages used for memmap
DMA zone: 106 pages reserved
DMA zone: 3835 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 513080 pages, LIFO batch:31
On node 1 totalpages: 524237
DMA32 zone: 7168 pages used for memmap
DMA32 zone: 443341 pages, LIFO batch:31
Normal zone: 1008 pages used for memmap
Normal zone: 72720 pages, LIFO batch:15
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2208
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 13, version 17, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 12, version 17, address 0xfec20000, GSI 48-51
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 52
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000edfcd000 - 00000000edfce000
PM: Registered nosave memory: 00000000edfce000 - 00000000edfd0000
PM: Registered nosave memory: 00000000edfd0000 - 00000000ee000000
PM: Registered nosave memory: 00000000ee000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at ee000000 (gap: ee000000:10c00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880003600000 s90328 r8192 d24360 u1048576
pcpu-alloc: s90328 r8192 d24360 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 [1] 2 3
Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032976
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 1c5e000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 4049560k/4489216k available (3083k kernel code, 295512k absent, 144144k reserved, 2048k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:916
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2392.528 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.05 BogoMIPS (lpj=9570112)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Dual Core AMD Opteron(tm) Processor 280 stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Dual Core AMD Opteron(tm) Processor 280 stepping 02
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU2: Dual Core AMD Opteron(tm) Processor 280 stepping 02
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Dual Core AMD Opteron(tm) Processor 280 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (19141.27 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group ffff88000360fbf0 cpus 0 group ffff88000370fbf0 cpus 1
domain 1: span 0-3 level NODE
groups: group ffff88007ff31000 cpus 0-1 (cpu_power = 2048) group ffff88007ff31060 cpus 2-3 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group ffff88000370fbf0 cpus 1 group ffff88000360fbf0 cpus 0
domain 1: span 0-3 level NODE
groups: group ffff88007ff31000 cpus 0-1 (cpu_power = 2048) group ffff88007ff31060 cpus 2-3 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 2-3 level MC
groups: group ffff88008240fbf0 cpus 2 group ffff88008250fbf0 cpus 3
domain 1: span 0-3 level NODE
groups: group ffff880111f37000 cpus 2-3 (cpu_power = 2048) group ffff880111f37060 cpus 0-1 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 2-3 level MC
groups: group ffff88008250fbf0 cpus 3 group ffff88008240fbf0 cpus 2
domain 1: span 0-3 level NODE
groups: group ffff880111f37000 cpus 2-3 (cpu_power = 2048) group ffff880111f37060 cpus 0-1 (cpu_power = 2048)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 1: io port [0, 2fff]
node 0 link 1: io port [3000, 3fff]
node 0 link 1: io port [4000, 4fff]
node 0 link 1: io port [5000, ffff]
TOM: 00000000ee000000 aka 3808M
node 0 link 1: mmio [ee000000, ff00ffff]
node 0 link 1: mmio [fec00000, fec0ffff]
node 0 link 1: mmio [a0000, bffff]
node 0 link 1: mmio [fec10000, fec1ffff]
node 0 link 1: mmio [fec20000, fec2ffff]
TOM2: 0000000112000000 aka 4384M
bus: [00,ff] on node 0 link 1
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [ee000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [112000000, fcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:01:00.0: reg 10 32bit mmio: [0xfeaff000-0xfeafffff]
pci 0000:01:00.1: reg 10 32bit mmio: [0xfeafe000-0xfeafefff]
pci 0000:01:04.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:01:04.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:04.0: reg 18 32bit mmio: [0xfeae0000-0xfeaeffff]
pci 0000:01:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:04.0: supports D1 D2
pci 0000:00:06.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfd000000-0xfeafffff]
pci 0000:00:06.0: bridge 32bit mmio pref: [0xf0000000-0xfcffffff]
pci 0000:02:01.0: reg 10 64bit mmio: [0xefff0000-0xefffffff]
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10 64bit mmio: [0xeffe0000-0xeffeffff]
pci 0000:02:01.1: PME# supported from D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:02:02.0: reg 10 io port: [0x4000-0x40ff]
pci 0000:02:02.0: reg 14 64bit mmio: [0xeffc0000-0xeffdffff]
pci 0000:02:02.0: reg 1c 64bit mmio: [0xeffa0000-0xeffbffff]
pci 0000:02:02.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
pci 0000:02:02.0: supports D1 D2
pci 0000:00:0a.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:0a.0: bridge 32bit mmio: [0xee000000-0xefffffff]
pci 0000:00:0b.0: bridge io port: [0x5000-0xffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LP00] (IRQs *10)
ACPI: PCI Interrupt Link [LP01] (IRQs *5)
ACPI: PCI Interrupt Link [LP02] (IRQs *9)
ACPI: PCI Interrupt Link [LP03] (IRQs *3)
vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x510-0x517 has been reserved
system 00:01: ioport range 0x504-0x507 has been reserved
system 00:01: ioport range 0x500-0x503 has been reserved
system 00:01: ioport range 0x520-0x53f has been reserved
system 00:01: ioport range 0x540-0x547 has been reserved
system 00:01: ioport range 0x460-0x461 has been reserved
system 00:0a: ioport range 0x400-0x47f could not be reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x540-0x55f could not be reserved
system 00:0a: ioport range 0x580-0x5ff has been reserved
system 00:0a: ioport range 0xca8-0xca8 has been reserved
system 00:0a: ioport range 0xcac-0xcac has been reserved
system 00:0a: ioport range 0xcb0-0xcb0 has been reserved
system 00:0a: ioport range 0xcb4-0xcb4 has been reserved
system 00:0a: ioport range 0xcc0-0xcdf has been reserved
system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved
Switching to clocksource acpi_pm
pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
pci 0000:00:06.0: IO window: 0x3000-0x3fff
pci 0000:00:06.0: MEM window: 0xfd000000-0xfeafffff
pci 0000:00:06.0: PREFETCH window: 0xf0000000-0xfcffffff
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0a.0: IO window: 0x4000-0x4fff
pci 0000:00:0a.0: MEM window: 0xee000000-0xefffffff
pci 0000:00:0a.0: PREFETCH window: 0xfeb00000-0xfebfffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: 0x5000-0xffff
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xfcffffff]
pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:02: resource 1 mem: [0xee000000-0xefffffff]
pci_bus 0000:02: resource 2 pref mem [0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 0 io: [0x5000-0xffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:07.3: disabled boot interrupts on device [1022:746b]
pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0a.0: disabled boot interrupts on device [1022:7450]
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0b.0: disabled boot interrupts on device [1022:7450]
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
pci 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:01:00.0: PCI INT D disabled
pci 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:01:00.1: PCI INT D disabled
pci 0000:01:04.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 9088k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1383665081.572:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7927
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2013-11-05 15:24:41 UTC (1383665081)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4240k
udev[101]: starting version 164
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
SCSI subsystem initialized
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
tg3.c:v3.116 (December 3, 2010)
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
tg3 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
ohci_hcd 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:01:00.0: OHCI Host Controller
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:00.0: irq 19, io mem 0xfeaff000
Fusion MPT base driver 3.04.12
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.12
tg3 0000:02:01.0: eth0: Tigon3 [partno(BCM95704s) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:14:5e:ce:29:74
tg3 0000:02:01.0: eth0: attached PHY is serdes (1000Base-SX Ethernet) (WireSpeed[0])
tg3 0000:02:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:02:01.0: eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
mptspi 0000:02:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mptbase: ioc0: Initiating bringup
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb1: SerialNumber: 0000:01:00.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:01:00.1: OHCI Host Controller
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.1: irq 19, io mem 0xfeafe000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:01:00.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ioc0: LSI53C1030 C0: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=26
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
tg3 0000:02:01.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
tg3 0000:02:01.1: eth1: Tigon3 [partno(BCM95704s) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:14:5e:ce:29:75
tg3 0000:02:01.1: eth1: attached PHY is serdes (1000Base-SX Ethernet) (WireSpeed[0])
tg3 0000:02:01.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:01.1: eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
scsi 0:0:0:0: Direct-Access LSILOGIC 1030 IM 1000 PQ: 0 ANSI: 2
scsi 0:1:0:0: Direct-Access IBM-ESXS ST973401LC FN B41D PQ: 0 ANSI: 4
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now optimal, enabled, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
mptbase: ioc0: PhysDisk is now online, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
mptbase: ioc0: PhysDisk is now online, quiesced
scsi target0:1:0: Beginning Domain Validation
scsi target0:1:0: Ending Domain Validation
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now optimal, enabled
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
mptbase: ioc0: PhysDisk is now online
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
mptbase: ioc0: PhysDisk is now online
scsi target0:1:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
scsi 0:1:1:0: Direct-Access IBM-ESXS ST973401LC FN B41D PQ: 0 ANSI: 4
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now optimal, enabled, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
mptbase: ioc0: PhysDisk is now online, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
mptbase: ioc0: PhysDisk is now online, quiesced
scsi target0:1:1: Beginning Domain Validation
scsi target0:1:1: Ending Domain Validation
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now optimal, enabled
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
mptbase: ioc0: PhysDisk is now online
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
mptbase: ioc0: PhysDisk is now online
scsi target0:1:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 0:0:0:0: [sda] 143110144 512-byte logical blocks: (73.2 GB/68.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Resume from partition 8:2
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[372]: starting version 164
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:00:0a.0: Cannot reserve MMIO region
input: PC Speaker as /devices/platform/pcspkr/input/input2
shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:00:0b.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD768 RNG detected
EDAC MC: Ver: 2.1.0 Sep 23 2012
EDAC amd64_edac: Ver: 3.2.0 Sep 23 2012
EDAC amd64: ECC is enabled by BIOS.
EDAC amd64: ECC is enabled by BIOS.
EDAC MC: Rev E or earlier detected
EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
EDAC MC: Rev E or earlier detected
EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[drm] Initialized drm 1.1.0 20060810
Error: Driver 'pcspkr' is already registered, aborting...
[drm] radeon defaulting to userspace modesetting.
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:01:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized radeon 1.32.0 20080528 for 0000:01:04.0 on minor 0
Adding 3906552k swap on /dev/sda2. Priority:-1 extents:1 across:3906552k
EXT3 FS on sda3, internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ADDRCONF(NETDEV_UP): eth0: link is not ready
fuse init (API version 7.13)
tg3 0000:02:01.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:01.0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6 addrconf: prefix with wrong length 120
IPv6 addrconf: prefix with wrong length 120
IPv6 addrconf: prefix with wrong length 120
IPv6 addrconf: prefix with wrong length 120
IPv6 addrconf: prefix with wrong length 120
IPv6 addrconf: prefix with wrong length 120